|
|
|
|
|
Reviews
|
Views
|
Date of last review
|
|
1
|
6816
|
07-15-2004
|
|
 |
|
Recommended By
|
Average Price
|
Average Rating
|
|
100% of reviewers
|
None indicated
|
None indicated
|
|
|
|
|
|
|
|
Description:
|
Dual Xeon Motherboard in a 2U Platform.
CPU: Dual Xeon Support
LAN: Intel 82546 Dual Gigabit
SCSI: AIC 7902 SCSI Controller
Memory: Upto 12 GB DDR/ECC/REG
Good for Midrange server and Clusters
OS: RedHat ES AS 3.0, Suse 8.1
lsmod Output
-----------------
Module Size Used by Not tainted
videodev 6272 0 (autoclean)
joydev 6112 0 (unused)
evdev 4800 0 (unused)
e1000 61232 1
lp 7200 0 (autoclean)
parport 26464 0 (autoclean) [lp]
isa-pnp 32608 0 (unused)
ipv6 183220 -1 (autoclean)
nls_iso8859-1 2844 1 (autoclean)
lvm-mod 68096 0 (autoclean)
ide-cd 30564 1 (autoclean)
st 29260 0 (autoclean) (unused)
sr_mod 14520 0 (autoclean) (unused)
cdrom 29120 0 (autoclean) [ide-cd sr_mod]
sg 30848 0 (autoclean)
input 3488 0 [joydev evdev]
usb-uhci 24428 0 (unused)
usbcore 64800 1 [usb-uhci]
reiserfs 200272 1
aic79xx 134692 3
lspci Output
---------------
00:00.0 Host bridge: Intel Corp.: Unknown device 254c (rev 01)
00:00.1 Class ff00: Intel Corp. e7500 [Plumas] DRAM Controller Error Reporting (rev 01)
00:03.0 PCI bridge: Intel Corp. e7500 [Plumas] HI_C Virtual PCI Bridge (F0) (rev 01)
00:03.1 Class ff00: Intel Corp. e7500 [Plumas] HI_C Virtual PCI Bridge (F1) (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CA IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
01:0c.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04)
02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04)
03:07.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (rev 01)
03:07.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (rev 01)
04:07.0 SCSI storage controller: Adaptec: Unknown device 801f (rev 03)
04:07.1 SCSI storage controller: Adaptec: Unknown device 801f (rev 03)
dmesg Output:
----------------
c, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
per-CPU timeslice cutoff: 1462.89 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4784.12 BogoMIPS
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Total of 2 processors activated (9555.14 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-19, 10-20, 10-21, 10-22, 10-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 24.
number of IO-APIC #9 registers: 24.
number of IO-APIC #10 registers: 24.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #9......
.... register #00: 09000000
....... : physical APIC id: 09
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 09000000
....... : arbitration: 09
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #10......
.... register #00: 0A000000
....... : physical APIC id: 0A
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 0A000000
....... : arbitration: 0A
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2392.3354 MHz.
..... host bus clock speed is 132.9073 MHz.
cpu: 0, clocks: 1329073, slice: 443024
CPU0
cpu: 1, clocks: 1329073, slice: 443024
CPU1
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
ACPI: Subsystem revision 20020829
PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4
PCI: Using configuration type 1
ACPI-0210: *** Error: Invalid type (Integer) for target of Scope operator [DEB_]
ACPI-0107: *** Error: Acpi_load_tables: Could not load namespace: AE_AML_OPERAND_TYPE
ACPI-0116: *** Error: Acpi_load_tables: Could not load tables: AE_AML_OPERAND_TYPE
ACPI: Unable to load the System Description Tables
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 0!
PCI BIOS passed nonexistent PCI bus 4!
PCI BIOS passed nonexistent PCI bus 2!
PCI BIOS passed nonexistent PCI bus 4!
PCI BIOS passed nonexistent PCI bus 2!
PCI BIOS passed nonexistent PCI bus 3!
PCI BIOS passed nonexistent PCI bus 2!
PCI BIOS passed nonexistent PCI bus 3!
PCI BIOS passed nonexistent PCI bus 2!
PCI BIOS passed nonexistent PCI bus 1!
PCI BIOS passed nonexistent PCI bus 0!
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 65532
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xfd000000, mapped to 0xf8813000, size 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:4cae
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 19991 bytes).
Console: switching to colour frame buffer device 82x26
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller on PCI bus 00 dev f9
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table.
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x03a0-0x03a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x03a8-0x03af, BIOS settings: hdc:DMA, hdd:pio
hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 300k freed
VFS: Mounted root (ext2 filesystem).
aic79xx: PCI4:7:1 MEM region 0x0 unavailable. Cannot memory map device.
nvram_scb == 0xfe
SCBPTR == 0xff
Signature = BIOS
aic79xx: PCI4:7:0 MEM region 0x0 unavailable. Cannot memory map device.
nvram_scb == 0xfe
SCBPTR == 0xff
Signature = BIOS
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0
aic7902: Ultra320 WideChannel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.0.0
aic7902: Ultra320 WideChannel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
Vendor: MAXTOR Model: ATLAS10K4_36SCA Rev: DF90
Type: Direct-Access ANSI SCSI revision: 03
(scsi1:A:1): 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
Vendor: ESG-SHV Model: SCA HSBP M18 Rev: 0.06
Type: Processor ANSI SCSI revision: 02
scsi1:A:1:0: Tagged Queuing enabled. Depth 32
sd_init()
sd: allocated major 8
sd_attach()
sd: find_free_slot ...sd: ... found 08:00
Attached scsi disk sda at scsi1, channel 0, id 1, lun 0
sd_attach()
sd_finish()
sd_init_onedisk (0,0), sda 08:00
SCSI device sda: 71833096 512-byte hdwr sectors (36779 MB)
Partition check:
sda: sda1 sda2
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (sd(8,2)) for (sd(8,2))
reiserfs: using ordered data mode
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 1052216k swap-space (priority 42)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:31:44 Sep 13 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x5020, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x5000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
sg: find_free_slot ...sg: initializing sg_major_array ...sg: allocated major 21
sg: ... found 15:00
sg_attach: dev0=(21:0)
sg: find_free_slot ...sg: ... found 15:01
sg_attach: dev1=(21:1)
Attached scsi generic sg1 at scsi1, channel 0, id 6, lun 0, type 3
hdc: bad special flag: 0x03
ide-floppy driver 0.99.newide
hdc: no flushcache support
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5(mp-v6)(15/07/2002) module loaded
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
Intel(R) PRO/1000 Network Driver - version 4.3.15
Copyright (c) 1999-2002 Intel Corporation.
eth0: Intel(R) PRO/1000 Network Connection
eth1: Intel(R) PRO/1000 Network Connection
usbserial.c: USB Serial deregistering driver Generic
usb.c: deregistering driver serial
uhci.c: USB Universal Host Controller Interface driver v1.1
eth0: no IPv6 routers present
cdrom: open failed.
Linux video capture interface: v1.00
Kernel Tested:
linux 2.4.19-64GB-SMP
|
|
Keywords:
|
Intel ServerBoard, Xeon, 7501, WV2
|
|
Chipset:
|
E7501
|
|
|
|
07-15-2004, 02:05 AM
|
#1
|
Registered: Mar 2002
Distribution: Gentoo, ubuntu, BeatrIX, Knoppix, RedHat <= 9, Solaris 8
Posts: 17
|
Would you recommend the product? yes | Price you paid?: None indicated | Rating: 0
|
Kernel (uname -r):
|
2.6.5-gentoo-r1
|
|
Distribution:
|
Gentoo
|
[ Log in to get rid of this advertisement]
Works well.
Had to use an older gentoo live cd (2.4 kernel based) in order to get it to boot & recognise the Intel SRCZCR Raid controller.
Current configuration : dual xeon's and Raid 1
Duties : Internet Gateway, proxy (squid) & firewall (shorewall)
|
|
|
|
All times are GMT -5. The time now is 11:59 AM.
|
|
|
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
|
|
 Latest Threads
LQ News
LQ Podcast
LQ Radio
|
|
