LinuxQuestions.org HCL

		LinuxQuestions.org > HCL > Laptops > Other
ProStar D5P

Notices

Search · Register · Submit New Product ·

ProStar D5P

Reviews	Views	Date of last review
1	5560	12-15-2004

Recommended By	Average Price	Average Rating
100% of reviewers	$450.00	10.0

Description:	I was able to install Gentoo on this laptop with zero problems. I was able to foresee the ati drivers being an issue and emerged them during initial install. The Intel Chipset is certainly supported and works just fine, I've tossed a Netgear WAG511 in the PCMCIA port, and it was detected and was very easy to setup as well (specific info posted in other HCL entry for WAG511), pcmcia-cs was installed and configured for the correct hardware in this laptop. The dimming/brighting Function key works great, however, I have yet to attempt to configure the 'hot' keys at the top. The DVD/CDRW combo drive works great, it was picked up as /dev/hdc, indicating it's secondary master (meaning I can upgrade if I ever desire to crack the case to do so ;) ); and works just fine buring CD's with cdrecord and ide-scsi passed during boot (currently /dev/scd0). In order to get the ATI drivers working correctly in x.org I did edit the videocard section by hand rather than use xorgconfig. Really this laptop worked great "out of the box" even though I was prepared for the worst.
Keywords:	Laptop Pentium4 Intel 82865G USB2.0 ATI radeon Touchpad realtek 8169 Gigabit
/sbin/lspci output:	0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Inter face (rev 02) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, fast devsel, latency 0 Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] #09 [2106] Capabilities: [a0] AGP version 3.0 0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 96 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00003000-00003fff Memory behind bridge: e8100000-e81fffff Prefetchable memory behind bridge: f0000000-f7ffffff 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Contro ller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at 1cc0 [size=32] 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Contro ller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 1ce0 [size=32] 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (re v 02) (prog-if 00 [UHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 2000 [size=32] 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI Contro ller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: medium devsel, IRQ 16 I/O ports at 2020 [size=32] 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Contr oller (rev 02) (prog-if 20 [EHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at e8000000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Norm al decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 00004000-00004fff Memory behind bridge: e8200000-e82fffff 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Interface Bridg e (rev 02) Flags: bus master, medium devsel, latency 0 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) IDE Controller ( rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 2060 [size=16] Memory at 40000000 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02 ) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: medium devsel, IRQ 17 I/O ports at 2040 [size=32] 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC '97 Audio Controller (rev 02) Subsystem: CLEVO/KAPOK Computer: Unknown device 0800 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 1400 [size=256] I/O ports at 1c80 [size=64] Memory at e8000c00 (32-bit, non-prefetchable) [size=512] Memory at e8000800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 0000:00:1f.6 Modem: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Modem Controller ( rev 02) (prog-if 00 [Generic]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0800 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 1800 [size=256] I/O ports at 1c00 [size=128] Capabilities: [50] Power Management version 2 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Rad eon 9600 M10] (prog-if 00 [VGA]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 23 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at 3000 [size=256] Memory at e8100000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 3.0 Capabilities: [50] Power Management version 2 0000:03:00.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 168, IRQ 16 Memory at 40001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 40400000-407ff000 (prefetchable) Memory window 1: 40800000-40bff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 0000:03:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 C ontroller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, medium devsel, latency 32, IRQ 21 Memory at e8204000 (32-bit, non-prefetchable) [size=2K] Memory at e8200000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 0000:03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigab it Ethernet (rev 10) Subsystem: CLEVO/KAPOK Computer: Unknown device 0500 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22 I/O ports at 4000 [size=256] Memory at e8204800 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 0000:04:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) Subsystem: Netgear: Unknown device 4610 Flags: bus master, medium devsel, latency 168, IRQ 16 Memory at 40800000 (32-bit, non-prefetchable) [size=64K] Capabilities: [44] Power Management version 2

Author

12-15-2004, 09:12 AM

MasterC

Registered: Mar 2002

Distribution: Gentoo ; LFS ; Kubuntu

Posts: 12,568

Thanked: 0

Would you recommend the product? yes | Price you paid?: $450.00 | Rating: 10

Kernel (uname -r):	2.4.23_pre8-gss-r2
Distribution:	Gentoo

[Log in to get rid of this advertisement]

Excellent compatibility. Worked just fine out of the box with a default Gentoo install (including pcmcia-cs). I wasn't able to check out the optional built in G card, as this wasn't in the model I purchased (used from a kid at the University). This laptop seems to have quite the hardware inside:
Pentium 4 2.8Ghz with HyperThreading technology
1GB RAM
80GB HD
DVD/CDRW
USB 2.0 all around
Firewire (IEEE1394)
S/PDIF port
S-Video Out
VGA Out

However, this box does only include a single PCMCIA port. This might be considered a point to look down upon if you have a need for more (though the machine does come with a lot of devices integrated...).

The touchpad can be fully customized within the xorg.conf file:
http://web.telia.com/~u89404340/touchpad/

I have found that with hotplug running, when I remove my PCMCIA Ethernet Card (Netgear WAG511) the system will occasionally lockup. I have to hold down the power button for 4 seconds to cycle power, and it starts up no problem. I've dropped this thing a lot too, and nothing has happened (yet :) ).

All in all, I am extremely pleased at the ease of getting this thing up and running in linux.

Cool

All times are GMT -5. The time now is 04:08 AM.

Main Menu

My LQ

Write for LQ

LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.

Main Menu

Syndicate

Latest Threads

LQ News

LQ Podcast

LQ Radio