|
Products
|
Views
|
Rating
|
Date
|
Reviews
|
Maxtor 541DX Ultra ATA 100
posted by trickykid
These particular hard drives should have no
problem working with Linux.
This covers Maxtor model numbers: 2B020H1,
2B015H1, 2B010H1, 2B008H1, 2B006H1, 2B004H1.
Key Feat ...
|
3250
|
10.00
|
11-04-2003 08:46 PM
|
1 reviews
|
Chaintech 6WIVL Socket 370 MicroATX
posted by trickykid
Chipset: Intel 810-L(Whitney) three chip AGPset
with 2D/3D graphics controller
Processor: Supports Intel Socket 370 Processors up
to 500MHz; Supports 66/100MHz system cloc ...
|
5254
|
9.00
|
11-04-2003 08:32 PM
|
1 reviews
|
ATI Xpert LCD
posted by finegan_hcl
This is an 8Mb early Rage card. It has HD-15
normal Svga out, LCD-out, and a really annoying
AIW connector that can be connected to RCA or
S-video. The Tv-out will work with e ...
|
1249
|
None
|
11-04-2003 06:02 PM
|
No reviews
|
Intel 82558 (Ethernet Pro 100)
posted by finegan_hcl
Basic Intel eepro100 card, I've got about 4 of
them. Handles 1000BaseT just fine. Its always
marked to be compiled in a kernel.org kernel. The
module is: eepro100.o
|
9812
|
9.27
|
11-04-2003 05:51 PM
|
12 reviews
|
3com 905B 100BaseTX (cyclone)
posted by finegan_hcl
Solid 10/100BaseT card. I use the 3c59x.o kernel
module as opposed to the 3com produced 3c905.o
module. I always get 100-BaseT speeds. It can
handle full duplex, although I've ...
|
7120
|
9.89
|
11-04-2003 05:48 PM
|
9 reviews
|
Maxtor ATA100 Raid
posted by finegan_hcl
This is one of the Promise cards that Maxtor
shipped with 200Gb hard drives for a while. Its
the PDC20267 chipset, buggy as the kernel driver
was written sorta blackbox, but g ...
|
1478
|
None
|
11-04-2003 05:44 PM
|
No reviews
|
Hewlett-Packard Deskjet 920c series printers
posted by Chinaman
This printer series contains the following
models:
HP Deskjet 920cxi
HP Deskjet 920c (NA)
HP Deskjet 920cvr
HP Deskjet 920c (EMEA)
Print cartridge information:
Black ...
|
4199
|
10.00
|
11-04-2003 05:35 PM
|
1 reviews
|
Initio 360p Scsi U/W Controller
posted by finegan_hcl
A good little cheap SCSI controller card. I've
never gotten the driver for this to compile
correctly under the 2.5.x series, and seeing as
how the one in 2.4.x doesn't seem to ...
|
1984
|
None
|
11-04-2003 05:30 PM
|
No reviews
|
ATI Radeon 9700 Pro
posted by jpbarto
The ATI Radeon 9700 Pro is advertised as supported
by ATI's FGLRX driver. While its true that the
card does work (I have it running at 8x on my PC)
the driver is not without ...
|
8237
|
8.17
|
11-04-2003 02:19 PM
|
6 reviews
|
Compaq Proliant 5000
posted by mcleodnine
The Compaq Proliant 5000 supports up to 4 Pentium
Pro CPUs and is equipped with onboard Fast/Wide
SCSI-2. CPUs and RAM are mounted on riser cards
from the mainboard. Replaceab ...
|
5973
|
9.67
|
11-04-2003 09:56 AM
|
3 reviews
|
Promise Ultra ATA 100 PCI Controller 20267
posted by crabboy
The Promise Ultra100 PCI controller is supported
in some 2.2 and all 2.4 kernels.
Motherboard must be at least PCI 2.1 compliant.
|
7601
|
7.60
|
11-03-2003 10:28 PM
|
5 reviews
|
Tyan Trinity i845 S2090
posted by trickykid
Processor
Single PGA478 ZIF socket
Supports one Intel Pentium 4 processor
Onboard VRM
System bus support for 400MHz
Chipset
Intel 845 chipset
82802AB FWH, 8280 ...
|
4071
|
10.00
|
10-30-2003 08:35 PM
|
1 reviews
|
Tyan Trinity KT S2390
posted by trickykid
Processor
Single Socket A ZIF socket
Supports one AMD Duron or Athlon processor
Auto-detection of processor voltage
200MHz (100MHz DDR) system bus speeds.
CPU compatibili ...
|
4201
|
10.00
|
10-30-2003 08:24 PM
|
1 reviews
|
Compaq SMART-2/P SCSI RAID Controller (PCI)
posted by mcleodnine
THe SMART-2/P SCSI RAID controllers were an option
on the Proliant series of x86-based servers circa
1997.
Uses module 'cpqarray'
Userland programs can be found in the ...
|
6188
|
10.00
|
10-30-2003 02:20 PM
|
1 reviews
|
Asus TX97-E
posted by trickykid
Intel Chipset: Features Intel's 430TX PCIset with
I/O subsystems.
Multi-Processor/Multi-Speed Support: Intel Pentium
75-233MHz (P55C-MMX P54C/P54CS), IBM/Cyrix
6x86-PR166 ...
|
6115
|
10.00
|
10-29-2003 07:03 PM
|
1 reviews
|
