Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
The Zip 100 works perfectly under linux.
Requires the 'ppa' module to be uncommented from
/etc/rc.d/rc.modules.
Below is taken from the Iomega website on getting
your Zip ...
The NetComm IN5710 is a full hardware 56k V90 PCI
modem. It has one line jack and one phone jack. It
works fine provided setserial is used to assign it
to a device.
I obtai ...
from Promise's
website
The FastTrak SX4000 Overview
The FastTrak SX4000 ATA RAID PCI adapter delivers
industry-leading RAID 5 performance at an
unprecedented performance-to ...
PCMCIA network card made by IBM, available with a
dongle which permits both 10baseT and 10base2 (the
"combo" part I presume). To the best of my
knowledge, this card is not sup ...
This is a old piece of hardware and i certainly
wouldn't pay for one, but in case you have one
laying around, here goes:
The physical board can be hard to identify, first
ver ...
Works well under Mandrake 9.1 and I suspect it
will work well with other distribs too. Dual Head
is fairly simple to set up too:
- You need 2x "Monitor" sections, one for e ...
The US Robotics Performance Pro modem was
recognized and works we'll, Ive used it with
Slackware 8.1-9.1. Its a PCI card with one phone
jack to your phone, one to the wall. It ...
Chipset: Intel 810-L(Whitney) three chip AGPset
with 2D/3D graphics controller
Processor: Supports Intel Socket 370 Processors up
to 500MHz; Supports 66/100MHz system cloc ...
This was one of the first socket7 motherboards to
be equiped with AGP style connection for video
cards. Using the VIA Apollo VP3 this board is
totally compatible with Linux as ...
Started life as an 80GB/7200rpm drive, but I now
put any drive in it for backups, testing,
anti-virus cleaning, and even the occasional cdrw
drive.
My TDK dvdrw went in once, ...
Solid 10/100BaseT card. I use the 3c59x.o kernel
module as opposed to the 3com produced 3c905.o
module. I always get 100-BaseT speeds. It can
handle full duplex, although I've ...
This is one of the Promise cards that Maxtor
shipped with 200Gb hard drives for a while. Its
the PDC20267 chipset, buggy as the kernel driver
was written sorta blackbox, but g ...
A good little cheap SCSI controller card. I've
never gotten the driver for this to compile
correctly under the 2.5.x series, and seeing as
how the one in 2.4.x doesn't seem to ...
Old 16MB 3dfx card. I miss 3dfx...
Anyway, when they included support for a lot of
older 3d cards in the XFree drivers in 4.3.0, this
one started behaving badly. I went wit ...
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
