Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
The KGPE-D16 is ASUS's dual Socket G34
workstation/server motherboard for Opteron 6000
series CPUs. It has the following specs:
- Two Socket G34 (LGA1944) sockets for 8, 12, ...
The HighPoint RocketRAID 2310 is a 4-port Serial
ATA-300 PCI Express x4 drive controller card. It
is of a small form factor and has brackets to fit
both standard-width I/O slo ...
Support 200/266MHz FSB, DDR*3 (Up to PC2700),
onboard Highpoint IDE RAID (no Linux driver
available), AGP w/o onboard graphics, no onboard
LAN. ATX form w/ 6 PCI slots.
The RocketRAID 1820A isn't supported natively by
the kernel, but Highpoint makes drivers available
for Debian 3.0 (Woody), Fedora, RedHat, and SuSe.
They also make an "open ...
2 Channel SATA RAID (Pseudo Hardware) controller,
supports IDE Harddrives
Works on kernel 2.6.8 with the Open Source
drivers, but can't seem to currently work on
2.6.11-8
This is a motherboard for dual Pentium III
processors (upto Tualatin) or single Tualatin
Celeron processors. BIOS supports motherboard
external frequency in 1 MHz increments, ...
On board Highpoint RAID controller (Soyo SY-P4X400
Dragon Ultra Platinum)
- 2X ATA133 IDE (Up to 4 devices)
- Supports RAID 0, 1, 0+1, as well as standard
IDE
I'm curr ...
A sweet looking platinum colored motherboard made
by Soyo!
- Supports Intel socket 478 P4 CPU with 400/533MHz
FSB up to 3.02GHz / P4 Celeron up to 2.8GHz
- 3X DDR - Up t ...
my board comes equiped with this raid controller
and it works beautifully .. i now have 5 of my
harddrives plus a burner in my machine and i
couldn't be more thankful ;)
be ...
This motherboard works fine on Peanut 9.5.
USB, IDE controller, IDE raid controller (HPT360)
with no problems.
I have not run the hard disks as raid array, only
use the ...
This version has the Highpoint HPT-366 chipset.
This was the last reason I needed to switch to
Linux since Winbloze does not support the HPT-66
(I have two ATA-66 hard-driv ...
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
