Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
This is a PCI card that provides two (additional)
serial ports to a desktop computer. It has two
16550A UARTs on it, as well as some sort of
controller chip.
I picked it up f ...
I loaded Ubuntu 6.10 (Edgy) on this laptop. Got
AIGLX/Beryl working for a pretty smooth 3D
desktop.
The media keys on the side like play/pause, next
etc were mapped to
XF86A ...
This is the dual-core ready version of the s2882.
There are 2 variants:
S2882UG3NR-D : SCSI-320 version
S2882G3NR-D : normal one
Processor
• Dual µPGA 940-pin ZIF so ...
64 bit RAID PCI SATA card (32 bit compatible) with
cache and XOR processor! A 15 page review with
pictures is here:
http://www.xbitlabs.com/article ...
Dual Channel Ultra320 PCI-X SCSI adapter. Each
channel appears in lspci as below. Tested in 33MHz
32-bit PCI slot, with both channels in use. Uses
Fusion MPT drivers.
Full length PCI card.
* Supports up to 4 drives with a single PCI card
* Ultra ATA / 133 interface
* StorSwitch point-to-point non-blocking
architecture
* 64 Bit 33MHz PC ...
This is one of the last generation Socket A
motherboard. Specially, it gets the "classical"
nForce2 Ultra 400 NB but with the nForce2 Gigabit
MCP SB.
> FW/IEEE1394A is cont ...
Software based sata raid card that supports 0, 1,
and 0+1 raid configurations. It supports drive
compacities greater than 137 GB and can be used on
33MHz and 66MHz PCI bus mo ...
This is a dual Xeon motherboard with excellent
support. Everything works. Uses the E7505
chipset, supports 533Mhz FSB Xeons and up to 8GB
(4 184pin sockets) DDR 266 memory i ...
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.